– Support Canon EOS R50 V. (*1)
– Support Fujifilm GFX100RF. (*1, 2)
– Support Fujifilm X-E5. (*1, 2, 3)
– Support Nikon COOLPIX P1100.
– Support Nikon Z5II. (*1, 4, 5)
– Support Panasonic DC-S1M2, DC-S1M2ES, and DC-S1RM2. (*1, 6)
– Support Panasonic DC-G97, DC-G99M2, DC-TZ99, and DC-ZS99. (*6)
– Support Ricoh GR IV.
– Support Sony A1 II. (*1, 7, 8)
– Support Sony ZV-E10 II. (*1)
– Supported RAW images captured in 14bit High Res Shot mode with the OMDS OM-1 Mark II.
– Fixed a problem that caused development parameters with modified Panasonic Photo Style or Fujifilm FILM SIMULATION settings in the SILKYPIX 11 series to not be correctly applied in the SILKYPIX 12 series.
– Fixed a problem that occasionally caused the image position or size to be significantly misaligned between the coarse preview and the development preview.
– Fixed a problem that caused the white balance color temperature to not be reproduced properly when opening RAW images shot with the white balance set to “Daylight” on the Canon EOS R6. (*9, 10)
– Other small fixes.
*1 HEIF (HIF) format is not supported.
*2 “FILM SIMULATION” is supported and an available film simulation can be selected.
*3 “Clear view” of the demosaicing engine is not supported.
*4 In operating environments where the CPU does not support SSE4 and AVX2 instructions, RAW images shot with RAW Recording “High efficiency★” and “High efficiency” are not supported.
*5 For a RAW image with NEFX RAW format, several features such as a demosaicing sharpness are unavailable.
*6 “Photo Style/Camera color” is supported and an available photo style can be selected.
*7 AXR RAW format is not supported.
*8 For a RAW image with ARQ RAW format, several features such as a demosaicing sharpness are unavailable.
*9 To enable this fix, select [Help] – [Troubleshooting] – [Delete temporary files] from the menu.
*10 Even in RAWs shot with a white balance other than “Daylight”, the initial color temperature values may change slightly before and after this problem is fixed.
